The kit

Build the frame. Watch it bend. Then draw what you saw.

The Structural Model Kit is the only part of this method you can hold. Cork board, bars, supports, load and reaction symbols, and nine practice problems — so the deflected shape stops being a diagram and becomes something you made happen.

£245

Whiteboard with a mechanical frame and markers on a corkboard.

A video shows you a deflected shape. The kit is the thing you bend.

David Brohn built the first prototypes at Bristol Polytechnic, now the University of the West of England, while he was teaching there and working out the first steps of what became the Brohn Method. Two problems kept coming back from his students and from the graduates he tested on his training courses:

  1. most could not visualise or draw the deflected shape of a loaded structure;
  2. very few could read the support reactions off that shape, which is where the bending moment diagram comes from.

Those are the two skills the IStructE Certificate in Structural Behaviour tests, and they are the two things a video cannot quite give you. The kit can: you load the frame with your own hand, and the shape is there in front of you.

Deflected shape diagram with moment, point load, fixed support and reactions.

What is in the box

Everything you need to build and load a beam, a frame or a portal frame, and record what happens.

Educational pegboard with metal shapes and blue hooks.
  • Cork board, the working surface
  • Cartridge paper, 10 sheets — pinned to the board and drawn on
  • Bars, 20 cm — six
  • Bars, 40 cm — six
  • Pins — twenty
  • A point load symbol
  • Connectors: rigid 2-way, rigid 3-way, rigid 4-way (two), pinned 2-way (two)
  • Support symbols: pinned, fixed, roller
  • Reaction symbols: vertical and horizontal (six), clockwise (four), anti-clockwise (six)
  • Nine practice problems, printed
  • The instruction manual

How it teaches, in five steps

This is the manual’s sequence, and it is the same sequence the Brohn Test asks you to run in your head.

  1. Pin a sheet of paper to the board. Everything you record goes on that sheet.
  2. Set up a structure from the practice problems. Choose the support conditions. The pins hold the frame, not the supports — that is what lets it move.
  3. Load it. Push the bar down, hold it with a pin, and mark it with the load symbol. Draw round the deflected shape.
  4. Read the reactions off the shape. Take one support away and see which way the structure moves. That tells you the direction of the reaction. Replace it with a reaction symbol.
  5. Draw the bending moment diagram. Straight off the deflected shape: zero at a pinned support, a linear run to the next, tension on the side the shape curves. The diagram is a consequence of the shape, not a separate calculation.

Then run the same structure through the QSE software that comes with the textbook, and compare. If your sketch and the software disagree, one of you has learned something.

David Brohn Understanding Structural Analysis book cover on desk.

The book

Understanding Structural Analysis

The textbook the courses are built on. First published in 1984, with a foreword by Sir Ove Arup, and still the book structural engineers keep to hand when a deflected shape will not come.

£49

Posted to you. Included in the CiSB package and the complete bundle.

Three ways to buy

Prices are live. Courses are delivered online, so no postage applies to them. Postage is added at checkout for the book, the kit and the bundles.

  Just the course Course + textbook Complete bundle
Price £235 £254 £430 £359
Video course ✓ ✓ ✓
The textbook — ✓ ✓
The model kit — — ✓
Best for Watching the method Reading alongside it Doing it with your hands
Saving — Saves £30 Saves £170

The complete bundle costs £114 more than the kit on its own — for which you also get the course and the textbook.

Questions people ask

Is it posted to me?

Yes. It is a physical kit, posted to the address you give at checkout. It weighs about 2.9 kg and the board is 80 cm long, so it arrives as a parcel.

Do I need the course to use it?

No. The kit comes with nine practice problems and a manual, and it works on its own. It is designed to sit alongside the course — the course teaches the method, the kit lets you perform it — but nothing about the kit depends on buying anything else.

Will it help with the IStructE Certificate in Structural Behaviour?

It trains the two skills the exam tests: seeing the deflected shape, and reading the reactions from it. It is an independent teaching aid, not an IStructE resource, and passing the exam is not something anyone can promise you.

Can I buy several for a cohort?

Yes. For classes and graduate programmes, see multi-seat licences and tell us how many you need.

Care and safety

Some of the plastic components are fixed to the board with sharp pins. Take care when unpacking and when handling the board, and keep it away from small children.

Not sure whether you can read a structure by eye?

Take the free Brohn Test first. Three questions, no calculation, and an answer in two minutes.