Back

Everything people ask before they buy

Twenty-five questions about choosing a course, how the teaching works, preparing for the Institution of Structural Engineers’ exam, paying for it, and what arrives in the post. If yours is not here, the contact page reaches a person.

Choosing a course

Which course should I start with?

Understanding Structural Behaviour. It is the foundation the other courses assume: deflected shapes, how load travels through a frame, and how to sketch a bending-moment diagram by eye before you analyse anything. Understanding Structural Analysis and Understanding Structural Design both build on it, and the Design course page says so plainly.

Do I need to be a graduate engineer to take these courses?

The courses are written for graduates in structural or civil engineering, and for experienced engineers returning to design after time away. The material assumes you can already analyse a structure; what it teaches is judgement about how that structure behaves. Undergraduates in their final year also use them.

How long is each course, and when does it expire?

You get 26 weeks of access from the date you enrol, which is enough to work through a course twice. Within that period you can revisit any lesson as often as you like. After it ends the course closes, but certificates you have been issued stay valid and remain verifiable.

What is the Brohn Test, and do I have to take it?

It is the test David Brohn first used on graduates entering the Arup Graduate School in the early 1970s: a set of loaded beams and frames, each with a box to sketch the bending-moment diagram. It is free, takes about fifteen minutes, and it is not compulsory. People take it to find out where they stand before choosing a course.

Are these courses suitable for someone who has been out of practice for years?

Yes — that is a common reason people come here. If you have been managing projects, or working in a specialism, and you want the instinct for how a frame behaves back, Understanding Structural Behaviour is the usual starting point.

How the courses work

Are the lessons live, or recorded?

Recorded. Each course is a series of video lessons hosted on Vimeo, which you watch at your own pace, in any order. There are no scheduled sessions and no time zone to work around.

How much time will I need each week?

Nothing is timetabled, so it depends on you. Most delegates spend a few hours a week and finish comfortably inside the 26 weeks. The Eurocode 2 courses carry more content than the behaviour course and take longer.

Do I need any special software?

No. You need a browser and, for most of the exercises, a pencil and paper — which is the point of the method. Nothing here requires a structural analysis package, and in fact the courses are designed so you can check what a package tells you.

Can I watch the lessons on a phone or tablet?

Yes. The lessons play in any modern browser on desktop, tablet or phone, and Vimeo adjusts quality to your connection. A larger screen is better for the diagrams, but the videos are legible on a phone.

Is there a tutor I can ask questions?

The online courses are self-paced, with self-assessment quizzes where the course includes them. There is no live tutor attached to the e-courses; if you want teaching with a person in the room, that is what the classroom courses exist for, and you can ask about those directly.

Preparing for the IStructE exam

Are these courses accredited by the Institution of Structural Engineers?

No. They are preparation, not accreditation, and no page on this site should be read as claiming otherwise. The Institution runs its own Structural Behaviour Course; David Brohn developed the approach it is based on, and the Institution recognised that work with its President's Award in 2015.

Will they help me pass the Chartered Membership exam?

They are aimed at the part of the exam that is hardest to revise for: whether you can look at a structure and reason about how it carries load, rather than whether you can complete a calculation. Examiners test judgement, and this method builds it. They are not a substitute for the Institution's own guidance or for exam practice.

Who teaches the Eurocode 2 courses?

Owen Brooker, Technical Director at Structronix, who chairs the Institution's Technical Publications Panel and the Design Group of The Concrete Society, and who is a marking examiner for the IStructE Chartered Membership exam. His courses cover the code as it is actually applied.

Do the courses count as CPD?

CPD hours are stated on each course page — ten for Understanding Structural Behaviour, eight each for Analysis and Design, six each for the two Eurocode 2 courses, and two for the Arch at Cribbs Causeway case study. Whether they count towards your own record is for your institution or employer to confirm.

Payment, invoices and access

Can I pay by invoice or purchase order?

Yes. Organisations can be invoiced rather than paying by card: contact us with the purchase order number and the delegates, and an invoice is raised. There is a page for organisations that sets out the options.

Which currencies can I pay in?

Prices are set in pounds sterling. The site displays an approximate price in your own currency based on where you are browsing from, and the amount actually charged is confirmed at checkout before you pay.

Can I get a refund?

Within 14 days, as long as you have not started watching the course. Once you begin, the 14-day right for a change of mind ends, because the video has been supplied — you agree to that at checkout. If a course is faulty or not as described, your rights are unaffected and are stronger. The full terms are on the shipping and returns page.

Do I get a certificate when I finish?

Yes, once you have completed 80 per cent of the course. The certificate carries a reference that anyone can check on the certificate verification page, which is how an employer confirms it is genuine.

Textbook and model kit

Do I need the textbook as well as the course?

No. Understanding Structural Analysis is a companion, not a prerequisite: it sets out the graphical method behind the courses in book form, and many people use it as the reference they keep at their desk after the course ends. It is now in its fourth edition.

What is in the Structural Model Kit?

A physical kit for building and loading structural models, so that behaviour becomes something you can see and feel rather than imagine. It is used alongside the courses, and it is described in detail on its product page.

Do you post outside the United Kingdom?

Yes, worldwide. Postage is calculated by weight and destination and is shown at checkout before you pay. Orders are dispatched within 1–2 working days, and overseas delivery times depend on the destination.

Can I buy the book or the kit without a course?

Yes. Both are sold on their own, and there is a bundle that combines a course, the textbook and the kit if you want all three.

For organisations

Can several engineers from one firm take a course?

Yes. Multi-seat licences exist for teams, so a group of engineers can be enrolled together rather than buying individually, and the price per seat is lower. There is a page for organisations with the details.

Can we run this training in-house?

The taught versions of these courses have been run for consultancies in the UK, Denmark, India and the Middle East for decades. If you want a cohort taught together, with or without the online material, that can be arranged — get in touch and describe the group.

Can our learning platform host the content?

That is a licensing conversation rather than something handled at checkout. Contact us with what you have in mind and it can be discussed.